Redcat Caldera 3
Featured Redcat Caldera 3, Sale Ends Soon
BS903-017 Left/Right C-Carrier w/ M3 Screws Redcat Racing Caldera Models
 | $5.89 End Date: Friday Jul-19-2013 15:03:34 PDT Buy It Now for only: $5.89 Buy It Now | Add to watch list |
Redcat Racing Volcano Caldera Black Yellow Body Shell Part # 25188-3
 | $27.87 End Date: Sunday Jun-30-2013 16:14:15 PDT Buy It Now for only: $27.87 Buy It Now | Add to watch list |
Redcat Racing BS903-072 B-Head Cross Screw (BT3*8) 12qty Caldera Earthquake ~
 | $3.30 End Date: Wednesday Jul-3-2013 17:12:50 PDT Buy It Now for only: $3.30 Buy It Now | Add to watch list |
Redcat Racing 3X10mm Flat Cross Screw for Caldera BS903-067
 | $3.30 End Date: Friday Jul-19-2013 14:45:57 PDT Buy It Now for only: $3.30 Buy It Now | Add to watch list |
Redcat Racing Front Suspension Arm Pin 3x37.5mm for Caldera BS903-024
 | $3.99 End Date: Wednesday Jul-17-2013 17:34:13 PDT Buy It Now for only: $3.99 Buy It Now | Add to watch list |
Redcat Racing C Carriers w/ M3 Screws for Caldera BS903-017
 | $4.20 End Date: Wednesday Jul-17-2013 8:58:20 PDT Buy It Now for only: $4.20 Buy It Now | Add to watch list |
Redcat Racing BS903-067 Flat Cross Screw 3x10 12 PCS Caldera Earthquake More ~
 | $3.25 End Date: Wednesday Jul-3-2013 14:37:01 PDT Buy It Now for only: $3.25 Buy It Now | Add to watch list |
BS909-004 Motor Pinion Gear 13T w/ M3 Screw Redcat Racing Caldera 10E, SC 10E
 | $6.45 End Date: Friday Jul-19-2013 20:33:05 PDT Buy It Now for only: $6.45 Buy It Now | Add to watch list |
Ideas and Redcat Caldera 3 Reviews - FAQ and Questions
- Nitro RC car keeps stalling and has bubbles in fuel line?
Help!! I have a Redcat racing caldera 3.0 and it's a decent, but from day 1 it's been getting bubbles in in the fuel line when the engine starts heating up (around 260°) and it causes the car to stop running and then I can't prime it until it cools down. I tried replacing the fuel and exhaust line but it still does it. And now it will drive just fine in my patio but the second it hits the grass the engine stalls, or if you blip the throttle it cuts off. Please only legitement answers
A Sounds like the problem is the fuel tank. It might have a crack, or the fill cap might not fit tight enough. Pull the tank, clean it. Put the new fuel tubing on and plug one end and see if you can blow air into the other end. Also try submerging the tank (ends of fuel line out of the water) and see if any water leaks in. It might also be a tuning issue. I see many people with the low speed needle way too lean, and the high speed needle too rich to try and compensate. This can lead to really high temps in the crankcase and carb, which can lead to vapor lock.
Help!! I have a Redcat racing caldera 3.0 and it's a decent, but from day 1 it's been getting bubbles in in the fuel line when the engine starts heating up (around 260°) and it causes the car to stop running and then I can't prime it until it cools down. I tried replacing the fuel and exhaust line but it still does it. And now it will drive just fine in my patio but the second it hits the grass the engine stalls, or if you blip the throttle it cuts off. Please only legitement answers
A Sounds like the problem is the fuel tank. It might have a crack, or the fill cap might not fit tight enough. Pull the tank, clean it. Put the new fuel tubing on and plug one end and see if you can blow air into the other end. Also try submerging the tank (ends of fuel line out of the water) and see if any water leaks in. It might also be a tuning issue. I see many people with the low speed needle way too lean, and the high speed needle too rich to try and compensate. This can lead to really high temps in the crankcase and carb, which can lead to vapor lock.
- Rc nitro engine will not start?
So this is my first actually rc, I got it for Christmas and its a redcat caldera 3.0 it was pretty easy to start the first couple weeks I've had it(I pretty much only run it during the weekends and sometimes during the week days) we replaced the pull start with an electric start and I use a power drill to start it. And it would usually start pretty easily.but a couple weeks ago probably at the end of January I havnt really gotten it to start or run properly. Like the glow plug works the drill works and we've richened and leaned it all over the place but we still can't get it started. I usually just try and start until either the drill battery runs out or the glow plug ignighter runs out. My dad has taken the engine apart and cleaned it and it still will not start. Can someone help?
A Maybe replace the glow plug? Bad gas? Running to rich or lean? If not try going back to the pull start
So this is my first actually rc, I got it for Christmas and its a redcat caldera 3.0 it was pretty easy to start the first couple weeks I've had it(I pretty much only run it during the weekends and sometimes during the week days) we replaced the pull start with an electric start and I use a power drill to start it. And it would usually start pretty easily.but a couple weeks ago probably at the end of January I havnt really gotten it to start or run properly. Like the glow plug works the drill works and we've richened and leaned it all over the place but we still can't get it started. I usually just try and start until either the drill battery runs out or the glow plug ignighter runs out. My dad has taken the engine apart and cleaned it and it still will not start. Can someone help?
A Maybe replace the glow plug? Bad gas? Running to rich or lean? If not try going back to the pull start
Compare these Redcat Caldera 3 Prices, Stores and Customer Reviews
Redcat Racing Caldera 3.0 1/10 Scale Nitro Monster TruckRedcat Racing includes A 2-Speed sealed transmission, explosive SH .18 3.00cc Nitro engine & slide carburetor make the Caldera 3.0 a volatile mini Mount St. Helens on or off the track. Faster acceleration leads to high octane excitement with this 4X4...
Redcat Racing Caldera 3.0 1/10 Nitro RTR Truck 2 SpeedRedcat 2-Speed sealed transmission, explosive SH .18 3.00cc Nitro engine & slide carburetor make the Caldera 3.0 a volatile mini Mount St. Helens on or off the track. Faster acceleration leads to high octane excitement with this 4X4 monster truck...
Redcat Racing Cast Aluminum Steering Knuckle Left/Right REDBS903-111Redcat Racing cast aluminum steering knuckles. L/R. Fits all Aftershock, Backdraft, Earthquake 3.0, Earthquake 3.5, and Caldera models.
Redcat Racing Complete Differential & Bulk Head Set - RCTBS803-025AThis is a replacement Redcat Racing Complete Differential & Bulk Head Set, and is intended for use with the Redcat Racing Shredder XB, Shredder XT, Shredder SC, Caldera 3.0, Aftershock 8E, Aftershock 3.0, Aftershock 3.5, Backdraft 3.5, Backdraft 8E,...
Caldera 3.0 1/10 Scale Nitro Truck (2 Speed)Caldera 3.0 1/10 Scale Nitro Monster Truck A 2-Speed sealed transmission explosive SH .18 3.00cc Nitro engine & slide carburetor make the Caldera 3.0 a volatile mini Mount St. Helens on or off the track. Faster acceleration leads to high octane...
Redcat Racing Part TE15-02H Cooling HeadThe Redcat Racing Part TE15-02H Cooling Head is Compatible with TORNADO S30, VOLCANO S30, AFTERSHOCK 3.0, CALDERA 3.0, EARTHQUAKE 3.0